We have smart and hardware bms for lifepo4 and li-ion lithium battery and support to be customized. Please contact us if need more support and cooperation.
INTRODUCTION
JBD-UP16S010 is a software protection board scheme specially designed for 10~16 strings of lithium battery packs. The product adopts architecture of front-end acquisition chip + MCU, with UART/RS485/CAN Function for Inverters Parallel Connect Support Same Port Unique SOC Display with Pre-discharge Heat and Buzzar Functions and some parameters can be flexibly adjusted through the host computer according to customer needs.
PARAMETERS
Cell specifications | 10~16 strings of Lithium Iron Battery |
Interface type | Charge and discharge are both at the same port |
Charging voltage | 3.6V*Number of strings |
Cell voltage | 2.7~3.65V |
Continuous charging | 100A 200A |
Continuous discharging | 100A 200A |
Consumption of | ≤40mA |
Consumption of sleep | ≤0.4mA |
Sleep conditions | Delay 65000s under no current \ communication \ protection |
Circuit resistance) | ≤10mR |
Operating temperature | -30℃~75℃ |
Size | 300±0.5mm * 100±0.5mm * 35±2mm |
Supplementary note:
Continuous standing for 65000s (settable) will automatically disconnect therelay and reduce the standby power consumption of BMS. A large charge discharge current will be identified through the pre charge discharge circuit, and then close the relay.
FUNCTIONS
1. Overcharge protection and recovery
2. Over-discharge protection and recovery
3. Charging overcurrent protection and recovery
4. Discharge overcurrent protection and recovery
5. Temperature Protection and Recovery
6. Balance function
7. Capacity calculation
8. Sleep function
9. Communication
Hot tags: Smart BMS 15S 100A, bms 15s lifepo4, bms 16s lifepo4, bms 15s 200a, bms 16s 200a, bms 15s 100a, bms for 15S battery, bms lifepo4 15s, bms lifepo4 16s, smart bms 15s, China, Customized, wholesale, manufacturers, suppliers, factory, made in China
