We have smart and hardware bms that for lifepo4 and li-ion lithium battery and support to be customized. Please contact us if need more support and cooperation.
INTRODUCTION
JBD-DP04S007 is a software protection board solution specially designed for 3~4 series lithium battery packs. The whole system adopts Jiche's front-end acquisition chip + Bluetooth solution, and some parameters can be flexibly adjusted through the host computer according to customer needs.
PARAMETERS
Cell specifications | 4 string of Lithium Iron Battery Pack |
Interface type | Charge and discharge are both at the same port |
Charging voltage | 14.4V |
Working voltage | 8.8~15.0V |
Continuous charging | ≤100A |
Continuous discharging | ≤100A |
Consumption of | ≤10mA |
Consumption of sleep | ≤800uA |
Sleep conditions | Delay 65000s under no current \ communication \ protection |
Circuit resistance) | ≤10mR |
Operating temperature | -30℃~75℃ |
Size | 160±0.5mm * 105±0.5mm * 10±1mm |
Function: | with Built-in Blutooth, Heating function or Switch function Support Series Connection |
Supplementary note:
The test should be performed in an environment with a temperature of 25±2℃ and a relative humidity of 65±20%.
1. Overcharge protection and recovery
2. Over-discharge protection and recovery
3. Charging overcurrent protection and recovery
4. Discharge overcurrent protection and recovery
5. Temperature Protection and Recovery
6. Balance function
7. Capacity calculation
8. Sleep function
9. Communication
Hot tags: bms 4s 100aA, 4s 100a bms for battery, bms 4s lifepo4, bms 4s 150a, 4s 100a smart bms, 100a smart bms with Heating function, smart bms support Series Connection, 4s 100 amp bms, bms for 4s battery, bms for 4s Lithium Ion Battery, China, Customized, wholesale, manufacturers, suppliers, factory, made in China
